6
In order to minimise the heating up of the inverter, do not expose it to di-
rect insolation. Install the inverter in a protected location, e.g. in the vicin-
ity of the solar modules or beneath the eaves.
Can be used at altitudes of up to 4000 m
IMPORTANT! The inverter must not be installed or used at altitudes
above 4000 m.
Do not install the inverter in:
- areas where ammonia, corrosive vapours, acids or salts are present
(e.g. fertiliser stores, ventilation openings from cattle sheds, chemi-
cal plants, tanneries, etc.)
As the inverter generates low levels of noise under certain operating con-
ditions, it should not be installed close to living areas.
Do not install the inverter in:
- places where there is an increased risk of damage from farm ani-
mals (horses, cattle, sheep, pigs, etc.)
- stables or adjoining areas
- storage areas for hay, straw, chaff, animal feed, fertilisers, etc.
Do not install the inverter in:
- places and environments subject to a heavy build-up of dust
- places and environments in which a heavy build-up of dust contain-
ing conductive particles (e.g. iron chips) is likely
Do not install the inverter in:
- greenhouses
- storage or processing areas for fruit, vegetables or wine-growing
products
- places used to prepare grain, green fodder or animal feeds
max.
4000 m
> 4000 m
NH
3
To Next Page
Loading...
Need help?
General
