Control elements and connections
Safety
WARNING!
Operating the equipment incorrectly can cause serious injury and damage.
All functions described in this document must only be used by trained and qualified per-
sonnel. Do not use any of the functions described until you have thoroughly read and
understood the following documents:
▶
this document
▶
all the operating instructions for the system components, especially the safety rules
Control elements
and connections
U1
I1
50-60 Hz
IP
23
1-400 V
0,6/0,7 A
Pmax 4,2 bar
Machine connected at:
Options:
P
1 l/min 0,75 kW
Pmax 0,95 kW
(1)
(5)(6)
(2) (3) (4)
Controls and connections on the front
No. Function
(1) Viewing window for coolant
level
(2) Fill nozzle with screw cap
(3) Blanking cover or coolant flow
connection (blue)
(4) Blanking cover or coolant return
connection (red)
(5) Rating plate
(6) Operating and maintenance
instructions
Controls and connections on the rear
(7) Coolant pump fuse
(8) Blanking cover or coolant return
connection (red)
(9) Blanking cover or coolant flow
connection (blue)
(10) Bushing for coolant pump shaft
(11) Drain hose
20
To Next Page
Loading...