Fronius IG 15 - Outdoors Connection (Continued)

51
ENEN
Note! Rawl plugs and screws are not included as every base sur-
face requires different ones.
- Fit part (1) of the wall mounting to a solid base surface using suitable
screws (3) and rawl plugs (4)
- Open on the FRONIUS IG connecting area (section „Open housing“)
Caution! There is a danger of the machine toppling over if the
FRONIUS IG is not secured using part (2) of the wall bracket. Hang
the FRONIUS IG into part (1) of the wall bracket and secure using
part (2) of the wall bracket.
- Fit part (2) of the wall bracket using suitable screws and rawl plugs.
- Fit AC and DC cables as described in the section „Connection“
26 mm
Important! Pay attention to the
following if a cable duct is fitted
underneath the FRONIUS IG:
- The bottom edge of the FRONI-
US IG is exactly 26 mm underne-
ath the top edge of part (2) of the
wall bracket
(2x)
(1)
(4) (5)
(4)
(5)
Fixing the wall
mounting
frame for
FRONIUS IG
Outdoors
(continued)
IG 30: 434 mm IG 60: 677 mm