Fronius MTG Series - Connecting the Welding Torch to the Wirefeeder

***
6
*** Screw the clamping nipple onto
the inner liner as far as it will
go. The inner liner must be vis-
ible through the hole in the cap.
7
Connecting the
welding torch to
the wirefeeder
3
4
8
5
7
6
9
10
1
* Only if the optional coolant
connections are fitted in the
wirefeeder and when using a
water-cooled welding torch.
Always connect the coolant
hoses according to their colour
coding.
14