Contents
General 4
Safety 4
General 5
Proper use 5
Options 6
Pistol grip 6
Heat shield 6
Potentiometer 6
Additional torch trigger on the top 7
ExtractionFumeEx 7
Torch trigger extension 7
Description of available functions 8
Up/Down-function 8
JobMaster-function 8
Functions of the two-stage torch trigger 8
Special functions 9
Installation and commissioning 10
MTG d, MTW d - Fitting wearing parts to the torch body 10
Assembling Multilock welding torches 11
Note regarding the inner liner with gascooled welding torches 11
Fitting the inner liner inside the torch hosepack 13
Connecting the welding torch to the wirefeeder 14
Connecting the welding torch to the power source and the cooling unit 15
Twisting the Multilock welding torch body 16
Changing the torch body on a Multilock welding torch 17
Care and maintenance 18
General 18
Recognising faulty wearing parts 18
Maintenance at every start-up 18
Maintenance every time the wirespool/basket-type spool is changed 19
Troubleshooting 21
Troubleshooting 21
Technical data 26
General 26
Gas-cooled welding torch - MTG 250i, 320i, 400i, 550i 26
Gas-cooled hosepack - MHP 250i, 400i, 550i G ML 27
Gas-cooled torch body - MTB 250i, 320i, 330i, 400i, 550i G ML 27
Water-cooled welding torch - MTW 250i, 400i, 500i, 700i 28
Water-cooled hosepack - MHP 500i, 700i W ML 28
Water-cooled torch body - MTB 250i, 330i, 400i, 500i, 700i W ML 29
3
EN
To Next Page
Loading...
