Fronius MTG Series - Functions of the Two-Stage Torch Trigger; Up;Down-Function; Jobmaster-Function; Description of Available Functions

Description of available functions
Up/Down-func-
tion
The Up/Down torch has the following
functions:
-
Changes the welding power in Syn-
ergic operation via the Up/Down
buttons
-
Error display:
-
all the LEDs light up red if
there is a system fault
-
all the LEDs flash red if there
is a data communication fault
-
Self-test during the run-up se-
quence:
-
all LEDs light up briefly one
after the other
JobMaster-func-
tion
The JobMaster welding torch has the
following functions:
-
The desired welding parameter on
the power source can be selected
using the arrow buttons
-
The selected welding parameter
can be changed using the +/- but-
tons
-
The display shows the current
welding parameter and value
Functions of the
two-stage torch
trigger
Function of the torch trigger in switch-
ing position 1 (torch trigger half
pressed):
-
LED lights up.
8