Fronius Robacta MTG 2500 - Replacing the Torch Neck

Replacing the
torch neck
CAUTION!
Danger of burning because of extremely hot torch.
This can result in serious personal injury and damage to property.
▶
For replacing of components as well as cleaning and checking of compon-
ents make sure that the torch has cooled down.
CAUTION!
Danger from tightening the torch neck with excessive torque.
Destruction of coupling point can be the result.
▶
Fasten the torch neck at the specified torque to prevent charring of the cou-
pling point.
▶
To avoid a damage of the Robacta coupling point do not fastening the torch
neck fixing screws without the torch neck.
** IMPORTANT! The torch neck can only be fitted and removed when the fitting
wrench is removed.
* IMPORTANT! Do not turn the fitting wrench any more than 1 - 1.5 turns when
undoing the torch neck fastening screw. Do not turn it any further than it will go.
2
1
1
*)
**)
1
2
3
2
0 mm
.0 inch
**)
1
3
1
3
4
2
4
33
EN