Fronius Robacta MTG 2500 - Connecting the Robot Hose Pack; MTG 2500 - Replacing the Components

Connecting the
robot hose pack
IMPORTANT! Make sure to seal the hose end by means of the enclosed plug, if
the port for the torch blow-out unit is not used. Otherwise the inert gas will get
mixed with outside air, which may adversely affect the welding results.
*
2
1
3
Fronius
*
2
1
3
Euro
* Port for torch blow-out unit (depending on the variant)
MTG 2500 - Re-
placing the com-
ponents
CAUTION!
Danger of burning because of extremely hot torch.
This can result in serious injury.
▶
For replacing of components as well as cleaning and checking of compon-
ents make sure that the torch has cooled down.
* gas nozzle plugged
** gas nozzle screwed
*** Key for bayonet (optional). This tool facilitates loosening and tightening of the
gas jet locking mechanism.
34