Fronius TransPocket 150 Quick Guide

/ Perfect Welding / Solar Energy / Perfect Charging
/ Perfect Welding / Solar Energy / Perfect Charging
WELDING SETTINGS
SAFETY
Before working with the device, ensure that you have read and understood all the documents provided
in hard copy and online. This document does not describe all the functions of the device. For a comple-
te description of the device, refer to the Operating Instructions.
42,0426,0216,EN 009-01082017
Available welding processes:
MMA welding
MMA welding with Cel electrode
TIG welding
Setting values:
Dynamic: 0 - 100 | Factory setting = 20
Welding current: TP 150 = 10 - 150 A /
TP 180 = 10 - 180 A (STICK), 10 - 220 A (TIG)
SoftStart / HotStart function: 30 - 200 % | Factory setting = 130 %
Pulse welding: OFF / 0.5 - 100 Hz | Factory setting = OFF
TRANSPOCKET 150/180 TIG
Quick Guide
WELDING SETTINGS
SAFETY
Before working with the device, ensure that you have read and understood all the documents provided
in hard copy and online. This document does not describe all the functions of the device. For a comple-
te description of the device, refer to the Operating Instructions.
42,0426,0216,EN 009-01082017
Available welding processes:
MMA welding
MMA welding with Cel electrode
TIG welding
Setting values:
Dynamic: 0 - 100 | Factory setting = 20
Welding current: TP 150 = 10 - 150 A /
TP 180 = 10 - 180 A (STICK), 10 - 220 A (TIG)
SoftStart / HotStart function: 30 - 200 % | Factory setting = 130 %
Pulse welding: OFF / 0.5 - 100 Hz | Factory setting = OFF
TRANSPOCKET 150/180 TIG
Quick Guide
Operating Instructions:
Operating Instructions:

Fronius TransPocket 150 Specifications

General

Welding Current Range	10-150 A
Mains Voltage	230 V
Protection Class	IP23
Electrode Diameter	1.5 - 4.0 mm
Mains Frequency	50/60 Hz
Insulation Class	F
Efficiency	85%
Welding Processes	MMA