To Next PageTo Next Page
Need help?Do you have a question about the Fronius TransPocket 2500 Comfort and is the answer not in the manual?
General| Input Voltage | 230 V |
|---|---|
| Welding Process | MMA, TIG |
| Protection Class | IP23 |
| Power Supply Frequency | 50/60 Hz |
| Power Factor | 0.99 |
| Rated Duty Cycle | 60 % |
| Efficiency | 85% |
| Welding Current Range | 10 A - 250 A |
| Cooling | Air-cooled |
Welcomes the user and explains the purpose of the operating instructions for the product.
Explains the device's properties, design, and application areas.
Covers general safety principles, operator qualifications, and proper usage.
Details risks from mains/welding current and safe handling practices.
Provides safety measures for placement, transport, and normal operation.
Details control panel functions and electrical connection sockets.
Covers safety, proper use, setup regulations, and mains connection.
Details safety warnings and parameter navigation for MMA welding.
Provides safety warnings and parameter navigation for TIG welding.
Covers safety for job welding and selecting the desired job process.
Describes opening, navigating, and setting parameters in the Setup menu.
Details parameters for MMA welding: Starting duration, Voltage cut-off, Dynamic rise.
Explains job setup for fine-tuning and copying jobs for MMA, CEL, and TIG processes.
Describes opening, navigating, and adjusting settings like language, contrast, and factory reset.
Provides a guide for diagnosing common faults like 'No welding current' and their remedies.
Outlines general care, start-up checks, and cleaning procedures.
Lists technical specifications for the TP 2500 Comfort, TP 2500 MVm, and TP 3500 Comfort models.
