7
EN
(10)
(9)
(8)
(7)
(6)
(12)
(13)
(11)
(6) Process button ... for selecting the welding process
- Rod-electrode welding (10)
- Rod-electrode welding with CEL-electrode (9)
- TIG welding (8)
- TIG pulsed-arc welding (7) (TP 1500 TIG only)
Important! Even if you unplug the machine from the mains, the selected welding
process will still be stored.
(11) Welding current dial ... for continuous adjustment of the welding current
(12) Malfunction indicator ... lights up when the unit is thermally overloaded (i.e.
overheats)
(13) Remote-control unit connection socket ... for connecting
- a remote-control unit (TP 1500 RC and TP 1500 TIG only)
- the control lead of an TTG 1600 A welding torch (TP 1500 TIG only)
Power source
(continued)
Fig.6 TP 1500 TIG power source: Controls and indicators on the operating panel
To Next Page
Loading...
