Need help?Do you have a question about the Fronius TransSteel 4000 Pulse and is the answer not in the manual?
General| Input Voltage | 3 x 400 V |
|---|---|
| Output Current Range (MIG/MAG) | 10 - 400 A |
| Output Current Range (TIG) | 10 - 400 A |
| Output Current Range (MMA) | 10 - 400 A |
| Welding Process | MIG/MAG, TIG, MMA |
| Duty Cycle | 60% at 400 A |
| Protection Class | IP 23 |
| Rated input voltage | 3 x 400 V |
Explains safety symbols, general guidelines, and responsibilities.
Covers personal protective equipment and hazards like flying sparks and toxic gases.
Details dangers from flying sparks and risks associated with electrical currents.
Covers shielding gas quality and safety precautions for gas cylinders.
Details safety measures during operation and maintenance procedures.
Emphasizes safety and provides a general overview of system components.
Explains the Voltage Reduction Device (VRD) function and its safety principle.
Lists minimum equipment and outlines safety before installation.
Details grid connection and mains cable installation.
Explains power limitation and introduces operating modes.
Guides on synergic, manual welding, and EasyJob functionality.
Covers safety and preparation for Manual Metal Arc welding.
Lists and describes setup parameters for MIG/MAG synergic and manual welding.
Covers MMA welding parameters and 2nd level menu access.
Lists common service codes, their causes, and remedies.
To Next Page