Fronius TransSteel 4000 Pulse - Parameter Selection and Indicators

Control panel
(1)
(2)
(3)
(4)
(5)
(6)(7)
(14)(13) (17)
(12)
(11)
(10) (8)
(9)
(15)(16)
No. Function
(1) "Parameter selection" button (right)
a) for selecting the following parameters
Arc length correction
For correcting the arc length
Welding voltage in V *)
Before welding begins, the device automatically displays a standard value
based on the programmed parameters. The actual value is displayed dur-
ing welding.
32