Warning notices
on the device
Warning notices and safety symbols are affixed to the power source. These warn-
ing notices and safety symbols must not be removed or painted over. They warn
against incorrect operation, as this may result in serious injury and property dam-
age.
Warning notices on the power source
Welding is dangerous. The following basic requirements must be met:
-
Adequate welding qualifications
-
Appropriate protective equipment
-
Exclusion of unauthorized persons
Do not use the functions described here until you have fully read and understood
the following documents:
-
These Operating Instructions
-
All system component Operating Instructions, especially the safety rules
22
To Next Page
Loading...
