Need help?Do you have a question about the Fronius TransSteel 5000 and is the answer not in the manual?
General| Input Voltage | 3 x 400 V |
|---|---|
| Protection Class | IP23 |
| No-load Voltage | 68 V |
| Wire Diameter MIG/MAG | 0.8 - 1.6 mm |
| Welding Process | MIG/MAG, MMA |
| Rated Input Frequency | 50-60 Hz |
Fundamental safety rules, intended use, and environmental operating parameters.
Critical safety measures for mains connection and protection against electrical shock.
Health risks from welding fumes, gases, and electromagnetic fields, with mitigation steps.
Safety precautions against flying sparks and risks from welding current.
Details the device's design, core functionality, and intended applications in steel welding.
Introduces the various system components that can be used with the power source.
Explains the Voltage Reduction Device (VRD) safety feature and its operating principle.
Explains the arrangement and functionality of controls on the device's panels.
Identifies and describes the various electrical connections and components on the power source.
Outlines critical safety checks and regulations before installing and commissioning the device.
Instructions for safely connecting the mains power cable, including strain-relief fitting.
Instructions for initial device start-up and system component assembly.
Provides solutions for common operational problems and error codes.
Outlines regular maintenance tasks, device care, and disposal procedures.
Lists detailed technical specifications, voltage ranges, current ratings, and performance data.
To Next Page
