Fronius TransSteel 5000 - Physical Connections and Components

31
EN
Connections, switches and mechanical components
TSt 3500/5000
power source
TSt 3500/5000 power source
No. Function
(1) (-) - Current socket with bayonet latch
used
- to connect the grounding (earthing) cable when MIG/MAG welding
- to connect the electrode cable or grounding (earthing) cable when MMA welding
(depending on the type of electrode used)
(2) Mains switch
for switching the power source on and off
(3) (+) - Current socket with bayonet latch
used
- to connect the current cable from the interconnecting hosepack when MIG/MAG
welding
- to connect the electrode cable or grounding (earthing) cable when MMA welding
(depending on the type of electrode used)
(4) Gas preheater (option)
(5) Machine interface (option)
(6) Mains cable with strain-relief device
(7) LocalNet connection
standardised connection socket for the wire-feed unit (intermediary hosepack)
(8) Air filter
remove from the side for cleaning
(1)
(7)
(1)(1)
(2)
(5)
(4)
(3)
(6)
(8)