Fronius TransSteel 5000 - Minimum Equipment Needed for Welding Task; General; MIG;MAG Welding, Gas-Cooled; MIG;MAG Welding, Water-Cooled

35
EN
Minimum equipment needed for welding task
General Depending on which welding process you intend to use, a certain minimum equipment lev-
el will be needed in order to work with the power source.
The welding processes and the minimum equipment levels required for the welding task
are then described.
MIG/MAG weld-
ing, gas-cooled
- Power source
- Earth cable
- MIG/MAG welding torch, gas-cooled
- Gas connection (protective gas supply)
- Wire-feed unit
- Interconnecting hosepack
- Wire electrode
MIG/MAG weld-
ing, water-cooled
- Power source
- Cooling unit
- Earth cable
- MIG/MAG welding torch, water-cooled
- Gas connection (protective gas supply)
- Wire-feed unit, water-cooled
- Interconnecting hosepack, water-cooled
- Wire electrode