Fronius TransSteel 4000 Pulse - Connecting the Interconnecting Hosepack

Connecting the
interconnecting
hosepack
WARNING!
Fitting the device incorrectly can cause serious injury and damage to property.
▶
Do not perform the steps described here until you have fully read and under-
stood the Operating Instructions.
NOTE!
When connecting the interconnecting hosepack, check that
▶
All connections are connected properly
▶
All cables, leads, and hosepacks are undamaged and correctly insulated
IMPORTANT! Gas-cooled systems are not fitted with a cooling unit. The water
connections therefore do not need to be connected for gas-cooled systems.
1
1
2
7
4
5
6
3
2
54