Fronius TransTig 2600

Fronius prints on elemental chlorine free paper (ECF) sourced from certified sustainable forests (FSC).
/ Perfect Charging / Perfect Welding / Solar Energy
MagicWave 2600
MagicWave 2600 Cel
MagicWave 3000
TransTig 2600
TransTig 2600 Cel
TransTig 3000
EN-US
Operating instructions
TIG power source
42,0426,0022,EA 003-22032021

Fronius TransTig 2600 Specifications

General

Brand	Fronius
Model	TransTig 2600
Category	Portable Generator
Language	English

Summary

Safety Instructions

Explanation of Safety Instructions

Details the meaning of DANGER, WARNING, CAUTION, and NOTE indicators.

Specific Hazards and Precautions

Addresses risks from sparks, fumes, electricity, EMC, and gas cylinders.

Operational and Maintenance Safety

Focuses on safe setup, operation, and maintenance procedures.

Minimum Equipment for Welding Operations

Control Panel

MagicWave Control Panel Details

TransTig Control Panel Details

Before Installation

Installation Safety and Regulations

Covers safety warnings, setup regulations, and environmental considerations.

Power Source Installation and Operation

Commissioning

Commissioning Procedure

Outlines the general steps for commissioning the power source.

TIG Operating Modes

Standard Operating Modes (2-Step, 4-Step)

Special 4-Step Operating Modes

TIG Welding

TIG Welding Safety and Preparation

Covers safety warnings and preparation steps for TIG welding.

TIG Welding Operations

Explains selecting modes, processes, cap-shaping, and arc ignition methods.

Manual Metal Arc Welding

MMA Welding Safety and Preparation

Covers safety warnings and preparation steps for MMA welding.

MMA Welding Operations

Explains selecting modes, processes, and parameter settings for MMA welding.

Remote Control

Available Remote Control Types

Working with Program Levels

Parameter Selection and Modification

Available TIG Parameters

Program Level Management (P1-P3)

Details program level service menu, code lock, and AC parameters.

Fault Diagnosis and Correction

Troubleshooting Safety and Error Codes

Covers safety during troubleshooting and lists displayed service error codes.

Power Source Faults and Remedies

Lists common power source faults and their remedies.

Service, Maintenance and Disposal

General Maintenance and Checks