To Next PageTo Next Page
Need help?Do you have a question about the Fronius TransTig 2600 Cel and is the answer not in the manual?
General| Brand | Fronius |
|---|---|
| Model | TransTig 2600 Cel |
| Category | Portable Generator |
| Language | English |
Explains safety signals and covers general rules for safe operation and handling.
Details protective gear, noise, and hazards from toxic gases, sparks, and electromagnetic fields.
Covers risks from grid and welding current, and stray currents.
Illustrates and details the primary settings on the MagicWave control panel.
Illustrates and details the primary settings on the TransTig control panel.
Details the connection sockets on the front of the device for system extensions.
Details the connection sockets on the front of the device for system extensions using the GWZ connector.
Crucial safety precautions to follow before operating the equipment.
Explains the functionality of the 2-step and special 2-step welding modes.
Details the 4-step mode and its variant with intermediate current lowering.
Highlights safety guidelines specific to TIG welding operations.
Guides on selecting the appropriate operating mode and welding process.
Details the processes for initiating the arc using HF and contact ignition.
Essential safety guidelines for performing MMA welding.
Outlines setup procedures and selection of operating modes/processes for MMA welding.
Explains the operation and settings of the TR 50mc pulse remote control.
Describes the functionality and advantages of the TR 52mc foot remote control.
Guides on accessing, selecting, and changing welding parameters within program levels.
Critical safety warnings to be observed before performing maintenance or diagnosis.
Lists common error codes and their potential causes for troubleshooting.
