Fronius VR 1550 CMT-WS - Rear Panel Connections

23
EN
(12) Welding torch connection
for connecting the welding torch
(13) VR 1500 cover (optional)
Rear of wire-feed
unit
Rear of VR 1500 / VR 1550 Rear of VR 1500 - 11 / 12 / 30
(1) LocalNet connection - interconnecting hosepack
(2) LocalNet connection
standardised connection socket for system extensions (e.g. remote control, etc.)
If the optional unreeling wirefeeder installation kit has been fitted to the wirefeeder,
the 17-pin amphenol plug of the unreeling wirefeeder installation kit is plugged into
(2) and the LocalNet connection is plugged into (14).
If the optional VR 1550 CMT installation kit has been fitted to the VR 1550, the
LHSB connection of the VR 1550 CMT installation kit is plugged into (2) and the
LocalNet connection is plugged into (14).
(3) (+) current connection with bayonet latch - interconnecting hosepack
(4) 2nd (+) socket with bayonet latch (optional 900 A installation kit)
(5) Blanking cover / wire-end connector (optional)
(6) Blanking cover
(7) Wire infeed tube
(8) VR 1500 cover (optional)
(9) Shielding gas connection
(10) Water return connection (red) - interconnecting hosepack
(11) Water flow connection (blue) - interconnecting hosepack
(12) Blanking cover/AIR IN "torch blow out" connection
(high end option, max. 7 bar)
(13) Blanking cover
(14) Blanking cover/LocalNet connection
(if the optional unreeling wirefeeder installation kit is fitted to the wirefeeder or
if the optional VR 1550 CMT installation kit is fitted to the wirefeeder)
(2)(1) (7)(3) (5)
(14)(15) (12) (9)(10)(11) (8)
(7)(3)(2)(1) (4) (5) (6)
(16) (15)(14)(13) (12) (11) (10) (9) (8)