Do not use the functions described here until you have thoroughly read and
understood the following documents:
- these operating instructions
- all the operating instructions for the system components, especially the
safety rules
Welding is dangerous. The following basic requirements must be met to
ensure the equipment is used properly:
- Welders must be sufficiently qualified
- Suitable protective equipment must be used
- All persons not involved must be kept at a safe distance from the wire-
feed unit and the welding process
Do not dispose of used devices with domestic waste. Dispose of them
according to the safety rules.
Keep hands, hair, clothing and tools away from moving parts. For example:
- Cogs
- Feed rollers
- Wirespools and wire electrodes
Do not reach into the rotating cogs of the wire drive or into rotating drive
components.
Covers and side panels may only be opened/removed while maintenance
or repair work is being carried out.
During operation
- Ensure that all covers are closed and all side panels are fitted prop-
erly.
- Keep all covers and side panels closed.
20
To Next Page
Loading...
