Fronius WF 25i Case D200 - Technical Data; WF 25 I Case D200; WF 25 I Case D300

Technical data
WF 25i Case
D200
Supply voltage 24 V DC / 60 V DC
Nominal current 0.5 A / 1.2 A
Welding current at 10 min/40 °C (104 °F) 40% D.C.* 60 %
D.C.*
100 %
D.C.*
500 A 450 A 360 A
Maximum shielding gas pressure 7 bar
101.53 psi
Coolant Original Fronius
Maximum coolant pressure 5 bar
72.53 psi
Wire feed speed 1 - 25 m/min
39.37 - 984.25 ipm
Wire drive 4-roller drive
Wire diameter 0.8 - 1.6 mm
0.03 - 0.06 in.
Wirespool diameter max. 200 mm
max. 7.87 in.
Wirespool weight max. 5 kg
max. 11.02 Ib.
Degree of protection IP 23
Mark of conformity S, CE
Dimensions l x w x h 507 x 200 x 320 mm
19.96 x 7.87 x 12.6 in.
Weight 9.5 kg
20.94 Ib.
*) D.C. = Duty cycle
WF 25i Case
D300
Supply voltage 24 V DC / 60 V DC
Nominal current 0.5 A / 1.2 A
Welding current at 10 min/40 °C (104 °F) 40% D.C.* 60 %
D.C.*
100 %
D.C.*
500 A 450 A 360 A
Maximum shielding gas pressure 7 bar
101.53 psi
Coolant Original Fronius
Maximum coolant pressure 5 bar
72.53 psi
Wire feed speed 1 - 25 m/min
39.37 - 984.25 ipm
Wire drive 4-roller drive
63
EN