Fronius WF 25i Case D200 - Page 4

General information 40
Connecting the interconnecting hosepack 40
Connecting a MIG/MAG welding torch 41
Inserting/replacing feed rollers 42
Safety 42
General 42
Inserting/replacing feed rollers 42
Inserting the wirespool, inserting the basket-type spool 44
Safety 44
Inserting a wirespool: D200 device 44
Inserting a wirespool: D300 device 45
Inserting a basket-type spool: D300 device 45
Threading the wire electrode 46
General 46
Preparations 46
Threading the wire electrode 47
Setting the contact pressure 47
Adjust the brake 48
General 48
Setting the brake: D200 device 48
Setting the brake: D300 device 49
Brake setup: D200 device 50
Brake setup: D300 device 50
Start-up 51
Safety 51
Prerequisites 51
General 51
Troubleshooting, maintenance and disposal 53
Troubleshooting 55
Safety 55
Troubleshooting 55
Care, maintenance and disposal 59
General 59
Safety 59
Every start-up 59
Every 6 months 60
Disposal 60
Technical data 61
Technical data 63
WF 25i Case D200 63
WF 25i Case D300 63
HP 70i Case 64
HP 95i Case 64
4