Fronius WF 25i - Threading the Wire Electrode

47
EN
1 2
Threading the
wire electrode
CAUTION!
Danger from welding current and accidental ignition of an arc.
This can result in severe personal injury and damage to property.
► Before starting work, disconnect the ground earth connection between the welding sys-
tem and the workpiece.
CAUTION!
Danger from emerging wire electrode.
This can result in severe personal injury and damage to property.
► Hold the welding torch with the end directed away from the face and body.
► Wear suitable protective goggles.
► Do not point the welding torch at people.
► Make sure that the wire electrode does not touch any conductive or earthed parts (e.g.
housing).
Lay the torch hosepack out straight
3 4
2
1
4
3
1
1
2
2
1
4
6
7
5
3
2
1
2
1
1
2
3