EasyManuals Logo

Frontier DH5410C User Manual

Frontier DH5410C
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
Checklists
AFTER-SALE CHECKLIST: It is suggested the following items be checked sometime during the first six
months operation of the disk.
Check the entire disk for loose or missing hardware.
Check for broken or damaged parts. Make necessary repairs.
Re-torque the hardware with special attention to the gang axle nuts and locks.
Safety chain is properly installed and undamaged.
If possible, run the disk to insure it is functioning properly.
Check the bearing wear plates are present and not excessively worn.
Visually check the oil-bath bearing for leaks. If parked unused for a long period in extreme weather
conditions, there may be seepage due to expansion and contraction of the metal duo-cone seals. This
condition will correct itself when the disk is operated. Lost oil should be replaced before operation.
Review the entire Operators Manual with the customer and stress the importance of proper and regular
lubrication and safety precautions.
Advise the customer of optional attachments that are available.
Date Checked_________________________ Signature_____________________________________________________
EACH DAY OF OPERATION CHECKLIST
Lubricate items required daily and those whose lubrication time is due.
Look for loose or missing bolts and parts.
Check hydraulic system for leaks and abraded hoses.
Check tire pressures and wheel lug nuts.
Check all pins have retaining hardware in place.
Check all oil-bath bearing assemblies for leaks. Check bearing wear plates are present.
Be sure all gang components are tight on the axles and axle nuts are tight and axle locks are present.
BEFORE EACH SEASON CHECKLIST
Be sure recommended lubrication is performed.
Inspect all oil-bath bearing assemblies are tight and dry and if wear plates need replacement.
Check hydraulic system for proper operation and leakage.
Check tire pressures and wheel lug nuts. Check for end play in wheel bearings and repack if necessary.
Be sure proper operating adjustments have been made for your conditions.
8

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Frontier DH5410C and is the answer not in the manual?

Frontier DH5410C Specifications

General IconGeneral
BrandFrontier
ModelDH5410C
CategoryFarm Equipment
LanguageEnglish

Related product manuals