24
Putting into service
DM1160
Preparing the tractor
The tractor PTO stub must rotate at a speed of 540 min
-1
.
The tractor must be equipped with a single-acting
hydraulic outlet.
Check that the tractor's authorized gross
weight as well as its lift capacity and
maximum weight per axle are not exceeded.
The front axle load (1) must never, under any
circumstances, be less than 20% of the
tractor's unladen weight. If necessary, add
ballast weights to the front or to the rear to
preserve the steering and braking efficiency.
The tractor must be fitted with lower link
stabilizers.
To Next Page
Loading...
