Frontier DM1160 - Draining and Refilling

50
Maintenance and storage
DM1160
$MAINTENANCE AND STORAGE
1. Frequency chart
Before adjusting, maintaining or repairing
the machine, turn off ignition key and wait
until all moving parts have come to a
complete stop.
BEFORE ADJUSTING
MAINTAINING OR REPAIRING
THE MACHINE, TURN OFF THE
ENGINE, REMOVE IGNITION
KEY AND WAIT UNTIL ALL
MOVING PARTS HAVE COME TO
A COMPLETE STOP.
599 004 20
After the first 10 hours of
use
Every 200 hours or at the
end of the season
Oil change:
- Cutterbar.
- Side gearbox.

Check and clean:
- Breather plug
