Frontier ST1129 - Assembly; Tools Required for Assembly; Contents of Shipping Carton; Parts Bags Contents

ASSEMBLY
8
MTF-0410104L
TOOLS REQUIRED FOR ASSEMBLY
1 - Knife
2 - 1/2” wrenches (or adjustable wrenches)
2 - 9/16” wrenches (or adjustable wrenches)
2 - 3/4” wrenches (or adjustable wrenches)
1 - 3/8” wrenches (or adjustable wrenches)
1 - Pair pliers or screw driver (to spread cotter pin)
HOW TO MEASURE SCREW SIZE
LENGTH
DIAMETER
CONTENTS OF SHIPPING CARTON
1- Snowthrower
1- Container of Fuel Stabilizer (Located in Parts Bag)
1- Parts Bag
WARNING: Always wear safety glasses or eye
shields while assembling snowthrower.
PARTS BAGS CONTENTS:
1 - Shift Lever Knob
(not actual size)
1 - Washer
1 - Nut
1 - Remote Chute Knob
(not actual size)
1 - Ignition Keys
*2- Shear Bolt
*2- Nut
* 2-Spacer
* Non Assembly parts are found in toolbox located on top of belt cover.