www.frontpointsecurity.com/support-overview
Preferred Sensor Setup (with transmitter on the door frame)
or Optional Sensor Setup (with magnet on the door frame)
For Doors:
STEP 1
Prep the surface
Locate the appropriate place for your sensor. Make sure the surface is clean and dry.
STEP 2
Place the sensor
• Place the transmitter on the door frame. If your door frame has decorative
molding, it may be easier to place the transmitter on the door itself and the
magnet on the door frame.
Before rmly securing the sensor, make sure it is in the correct position.
• Remove the wax backing from the adhesive strip
• Press the sensor rmly in place and hold for about 30 seconds
Intrusion Sensors:
Door & Window Sensor
Transmitter Magnet
To Next Page
Loading...