www.frontpointsecurity.com/support-overview
Life Safety Sensor:
Smoke & Heat Sensor
WHERE TO PLACE
• In a hallway that is centrally located near several bedrooms
• If on a ceiling, place in the center of the room at least 4 inches away from the
nearest wall
• If on a wall, place 4–12 inches below the ceiling
WHERE NOT TO PLACE
• Near a ventilation source, which may prevent smoke from reaching the sensor
• In a damp or very humid area (such as a bathroom with a shower)
• In or near kitchens, garages, furnaces/hot water heaters, or space heaters
Want to learn more?
Visit www.frontpointsecurity.com/support-overview for more
details about system setup.
The Smoke & Heat Sensor uses a
photoelectric chamber to
detect smoke particles in the
air, and a temperature sensor to
detect a rapid rise in a room’s
air temperature.
To Next Page