www.frontpointsecurity.com
The Door & Window Sensor is a small, wireless
device that detects the opening and closing of
just about anything. This sensor comes with
two pieces: the larger piece (transmitter) and
the smaller piece (magnet). When placing the
two pieces, nd the “arrow” on each and be
sure these arrows are as close together as
possible (within 3/4 of an inch).
Intrusion Sensors:
Door & Window Sensor
WHERE TO PLACE
• A front or back door
• Any ground oor door or window
• Within ~100 feet of the Control Panel
• Anything that opens and closes (e.g. medicine or gun cabinet, drawer, etc.)
SETUP TIPS
• Prior to setting up your Door & Window Sensors, turn on the “chime” feature on
your Control Panel. (See the Your Control Panel guide to learn about “chimes.”)
• The adhesive included with your sensors is industrial-grade. Make sure each
sensor is in the correct location before rmly securing.
Want to learn more?
Visit www.frontpointsecurity.com/support-overview for more
details about system setup.
To Next Page
Loading...