www.frontpointsecurity.com
For Windows:
STEP 1
Prep the surface
Locate the appropriate place for your sensor. Make sure the surface is clean and dry.
STEP 2
Place the sensor
• Place the transmitter on the window frame. If your window frame has decorative
molding, it may be easier to place the transmitter on the door itself and the
magnet on the door frame instead.
• Press the sensor rmly in place and hold for about 30 seconds
SETUP TIP
* If you have double-hung windows, go to: www.frontpointsecurity.com/customer
and learn more.
Transmitter Magnet
Preferred Sensor Setup or
Optional Sensor Setup
* Standard Window
Intrusion Sensors:
Door & Window Sensor
To Next Page
Loading...