PREPARING FOR USE
4.2 Before Riding
7
1. Ensure all the exposed bolts and screws are tightened.
2. Raise the kickstand to its upright position.
3. When riding for the first time, wait 3-5 minutes after
pulling the pull start to allow the engine to fully warm up
before riding.
4. Make sure the engine is running.
5. Put one foot on the deck of the motorcycle. While
pushing off with the other foot, gently rotate the
THROTTLE toward the rider, on the right side of the
handlebars. The bike will begin to move on its own power.
6. Control the speed by rotating the hand throttle either
towards the rider or away.
To Next Page
Loading...
