QUICK REFERENCE SAFETY GUIDE
Ⅳ
Fuel Safety
Mix and pour fuel outdoors away from
sparks or flames.
Only use a container approved for fuel.
Do not smoke or allow smoking near the
motorcycle while working on the engine,
or while the engine is running.
Wipe up and clean all fuel spills before
starting the engine.
Move at least 10 feet away from where
you fueled before starting the engine.
Stop the engine before removing the fuel
cap.
It is recommended that you empty the
fuel tank prior to shipping or storage to
prevent fuel leaks.
Do not store your motorcycle near open
flames, furnaces, electric motors, or
switches.
Maintenance
Maintain your motorcycle as
recommended in this Product Handbook.
Disconnect the spark plug cap before
performing any engine maintenance,
except for carburetor adjustments.
Keep others away while making
carburetor adjustments.
Use only quality replacement parts as
recommended by the manufacturer.
Transportation and Storage
Carry your motorcycle by the handlebar
tube with the engine off and the muffler
away from your body.
Allow the engine to cool, empty the fuel
tank, and fold the motorcycle before
carrying or storage.
It is recommended that you empty the
fuel tank prior to shipping or storage to
prevent fuel leaks.
Clean the motorcycle carefully and store
it in a cool, dry place.
Product Safety
Keep hands and feet away from moving
parts.
Inspect the entire product prior to each
use. Replace damaged parts.
Check for fuel leaks and make sure all
fasteners are in place and securely
fastened.
Replace all parts that are cracked,
chipped, or damaged before use.
Use only parts and accessories that are
recommended by the manufacturer.
If a situation arises that is not covered in
the manual, proceed with caution and
use good judgment.
Contact your dealer if you need further
assistance.
To Next Page
Loading...
