FrSky TD SR10 - Product Features and Status Indicators; Core Product Features; LED Status Interpretation; Receiver Registration and Binding

Instruction Manual for TD R10 & TD SR10 Dual-Band Receivers
FrSky Electronic Co., Ltd. www.frsky-rc.com Contact us : frsky@frsky-rc.com
Add: F-4,Building C, Zhongxiu Technology Park, No.3 Yuanxi Road, Wuxi, 214125, Jiangsu, China Technical Support: sales4tech@gmail.com
Features
● Simultaneous working dual-band TD mode
● Triple antenna design for multi-directional coverage
● Built-in Advanced Stabilization Functions (TD SR10)
● Built-in High-Precision Telemetry Sensor (Altitude, Vertical Speed, etc.) (TD SR10)
● Black Box function
● Built-in voltage sensor
● 4ms Race Mode with Telemetry
● Long control range (Range varies based on the RF Power settings.)
● Over-The-Air (OTA) FW update
● Supply current range (every single port)
- Instantaneous current: 5A
- Continuous current: 3A
● 10 Configurable Channel Ports
- CP1: PWM / SBUS Out / FBUS / S.Port / SBUS In
- CP2-10: PWM / SBUS Out / FBUS / S.Port
Follow the step below to finish the registration & binding procedure:
1. For TANDEM X20 as an example, enter into the Model, select RF System, turn on the internal module, select
status [ON] and TD MODE(Type). Then determine the antennas (internal or external) and choose the RF power
according to the actual usage, then select [Register].
2. Connect the battery to the receiver while holding the button on the receiver. The RED LED and GREEN LED
on the receiver will be on, indicating into the [Reg] status.
3. When it shows the Register ID, RX name and UID, click [Register]. The RED LED and GREEN LED on the
receiver will flash, and the transmitter displays [Registration OK].
Registration & Automatic Binding
LED State
Green LED (2.4G)
On
Flash
On
On
On
Off
Red LED
On
Flash
Off
Off
Off
On
Status
Register
Register successfully
Bind
Bind successfully
Working normally
Failsafe
Blue LED (900M)
Off
Off
Off
Flash
Flash
Off
Yellow LED
ON
OFF
Flashing
State (Calibration of Accelerometer)
exceeding limits (0.9G,1.1G)
In normal status
Calibration is completed
Yellow LED
ON
Flashing
OFF
State (Self-check)
Center detection of channel in progress
Max & Min of channels in detecting
Self-check is completed
Green LED
On
-
Off
Red LED
Off
Off
On
Status
2.4G in working
900M in working
Failsafe
Blue LED
-
Flash
Off