Blinking Green Quickly
(2Hz)
Blinking Green Slowly
(0.5Hz)
Green
Amber
Blinking Amber Quickly
Blinking Amber Slowly
O
LEDs Status Description
System is abnormal.
SYS
The system is running in u-boot mode.
The system is normally running.
The system occurs alarm or error.
No power or no system runs or runs abnormally.
System software is in initial state.
System is initial in u-boot mode.
Green
Green
Blinking Green
Green
Blinking Green
Green
Blinking Green
Amber
Blinking Amber
O
Amber
Blinking Amber
O
O
Blue
Amber
O
PWR
ID
ETH
RJ45
O
Power supply is ok.
Port is linked.
Power supply is abnormal.
Power supply is absent or single power supply
is abnormal.
ID indication function enable.
ID indication function disable.
Port is receiving or transmitting packets.
Port is not linked.
1G port is linked.
1G packets are receiving or transmitting.
10/100M port is linked.
Port is not linked.
SFP+
10G port is linked.
10G packets are receiving or transmitting.
1G port is linked.
1G packets are receiving or transmitting.
Port is not linked.
10/100M packets are receiving or transmitting.
Green
Amber
O
25G port is linked.
25G packets are receiving or transmitting.
1G/10G port is linked.
1G/10G packets are receiving or transmitting.
Port is not linked.
On
On
Blinking
Blinking
SFP28