FS S5800-48F4SR - Grounding the Switch

1. Connect one end of the grounding cable to a proper earth ground, such as the rack in which the
switch is mounted.
2. Secure the grounding lug to the grounding point on the switch back panel with the washer and
screws.
2. Attach the switch to the rack using four M6 screws and cage nuts.
31 32
33 34
35 36
37 38
39 40
41 42
43 44
45 46
47 48
49 50
51 52
10G
Grounding the Switch
CAUTION: The earth connection must not be removed unless all supply connections have
been disconnected.
CON
ETH
ID
SYS
1 2
3 4
5 6
7 8
9 10
S5800-48F4SR