FS S5800-48F4SR - Connecting the Management Ports; Connecting the Console Port

Connecting the Management Ports
1. Insert the RJ45 connector of the console cable into the RJ45 console port on the front of the switch.
2. Connect the other end of the console cable to the RS-232 serial port on the computer.
1. Connect one end of a standard RJ45 Ethernet cable to a computer.
2. Connect the other end of the cable to the ETH port on the front of the switch.
Connecting the Console Port
Connecting the ETH Port
CON
ETH
ID
SYS
1 2
3 4
5 6
7 8
9 10
11 12
13 14
15 16
17 18
19
S5800-48F4SR
CON
ETH
ID
SYS
1 2
3 4
5 6
7 8
9 10
11 12
13 14
15 16
17 18
19 20
21 22
23 24
25 26
27 28
29 30
31 32
1G
S5800-48F4SR