Data Center, Enterprise & ISP Network Solutions
2.3 Install the Switch on a Workbench
In many cases, users do not have a standard 19" rack, so people often place switches on a
cleaning working platform.
Such operation is relatively simple, and the only following aspects should be concerned during
operation:
• Ensure the working platform is stable and well earthed.
• A 10 cm space around switch is left for heat dissipation.
• Do not place heavy objects on switches.
Installation Recommendations:
When installing a variety of equipment on the same cabinet, it is recommended to install the
heavy equipment at the bottom or near the bottom of the cabinet to reduce the center of gravity
of the cabinet.
Step 4: Place switch on the tray horizontally, push it slightly into the rack along the tray, and fix
the other end of Front Mounting Brackets upon the front hold strip of rack using screw
and its matching floating nut.
To Next Page
Loading...
Need help?
General
