FS S5850-48S8C User Manual

1. Insert the RJ45 connector of the console cable into the RJ45 console port on the back of the switch.
2. Connect the other end of the console cable to the RS-232 serial port on the computer.
Connecting the Console Port
1. Connect one end of a standard RJ45 Ethernet cable to the Ethernet port of a computer.
2. Connect the other end of the cable to ETH port on the back of the switch.
Connecting the ETH Port
10
EN

FS S5850-48S8C Specifications

General

Brand	FS
Model	S5850-48S8C
Category	Switch
Language	English