5
Anti-static gloves must be worn when replacing interface board to prevent static electricity
from damaging veneer.
Installation Site
Ensure that there are some spaces at the inlet and outlet of switch for heat dissipation of switch
chassis.
To ensure a normal work environment, S5850 series switches should have the following
requirements for workplace:
Ensure that rack and working platform have good ventilation and heat dissipation systems.
Ensure that rack and working platform are rm enough to support the weight of a switch and
its accessories for installation.
Ensure rack and working platform are well earthed.
Mounting the Switch
1. Install the front mounting brackets and the sliding rails on the switch.
Rack Mounting
EN
To Next Page
Loading...
