Fatigue Technology Inc. 401 Andover Park East Seattle, WA • USA 98188-7605 Tel: (206)246-2010 Fax: (206)244-9886
57429 – Rev L 19
The following parts list, Table 6.4-1, corresponds to the drawing in Figure 6.4-1 on the previous page.
Table 6.4-1
Little Brute Parts List
2 LB Housing*
3 LB Piston Assembly*
4 LB Barrel*
* Part numbers dependent on applicable puller unit (-10, -20, -25, etc.).
(1) Chuck assemblies may be substituted for tang-style or pintail mandrels. Contact FTI for assistance.
(2) Contained as part of the Air Seal Adapter, part number LB-D9.
(3) All new Little Brute handles are equipped with new cartridge trigger assembly (see Section 6.1).
(4) Not included.
Table 6.4-1 (Continued)
Hose Assembly – Not Shown in Figure 6.4-1
Hydraulic Hose Assembly – 10 foot
Air Hose Assembly, Male – 10 foot
Air Hose Assembly, Female – 10 foot
1 IWZY-10
Complete Hose Assembly – 1 each
2106-001, 2106-002, and 2107-001
To Next Page
Loading...