Fugoo GO FSNA3 - Charging and Battery Status; Checking Battery Level; Charging the Speaker

User Manual Fugoo GO Bluetooth Speaker Model FSNA3 page 4 1/27/2017
Charging and battery charge status
Checking the battery level
• With the speaker powered on, click the (Power) button momentarily . The LED
indicator blinks one to four times to indicate the charge status of the battery.
• If voice prompts are enabled, the speaker responds with "Battery is almost full." or
another indication of the state of the battery’s charge, per the table below.
• If the battery charge gets very low, the speaker will say “Please recharge the
battery. Powering off.”, and the speaker will turn off.
LED indicator
Voice prompt
Four blinks
Battery is full.
Three blinks
Battery is three quarters.
Two blinks
Battery is half.
One blink
Battery is low.
• While the speaker’s battery is being charged, the LED will slowly pulse on/off.
• When the speaker’s battery has reached full charge, the LED will glow solid.
Charging your speaker
• Connect supplied USB Cable to any USB charging port and to the speaker’s micro USB
jack.