Fuji Electric MICREX-F User Manual

1
Fuji Electric Co.,Ltd.
MICREX-F Series
SIO Driver
1 System Configuration.......................................................................................................3
2 Selection of External Device ............................................................................................7
3 Example of Communication Setting.................................................................................8
4 Setup Items....................................................................................................................24
5 Cable Diagram ...............................................................................................................29
6 Supported Device...........................................................................................................44
7 Device Code and Address Code....................................................................................46
8 Error Messages..............................................................................................................47

Fuji Electric MICREX-F Specifications

General

Brand	Fuji Electric
Model	MICREX-F
Category	Controller
Language	English

Summary

Example of Communication Setting

Setting Example 1

Details the GP-Pro EX settings for communication between the Display and External Device.

Setting Example 2

Provides GP-Pro EX communication settings for a different configuration scenario.

Setting Example 3

Outlines GP-Pro EX communication settings, focusing on specific parameters for connection.

Setting Example 4

Illustrates GP-Pro EX communication settings for a particular device setup.

Setting Example 5

Shows GP-Pro EX communication configuration, including character setup.

Setting Example 6

Presents GP-Pro EX communication settings with specific baud rate and station number.

Setting Example 7

Describes GP-Pro EX communication settings for External Device connection.

Setup Items

Setup Items in GP-Pro EX

Configures communication parameters for the Display using GP-Pro EX software.

Setup Items in Offline Mode

Sets communication parameters directly on the Display unit in offline mode.

Cable Diagram

Cable Diagram 1

Details RS232C cable connections for 1:1 and 1:n communication with specific devices.

Cable Diagram 2

Illustrates various connection configurations using adapters and cables for different GP models.

Cable Diagram 3

Presents a specific RS232C cable connection (3A) with signal mapping.

Cable Diagram 4

Shows RS232C cable connections (4A, 4B) with signal mapping for interfaces.