Fuji Electric NA0AW06-MR User Manual

series
USER’S MANUAL
Analog Unit
FEH527d

Fuji Electric NA0AW06-MR Specifications

General

Brand	Fuji Electric
Model	NA0AW06-MR
Category	Controller
Language	English

Summary

Safety Precautions

Warning

Defines warnings for incorrect handling leading to death or serious injury.

Caution

Defines cautions for incorrect handling leading to minor injury or physical damage.

Section 1 Overview

Section 2 Specifications

2-1 General Specifications

2-2 Functional/Performance Specifications

Outlines functional and performance details for analog units.

2-2-1 Analog Input Unit Specifications

Provides detailed specifications for the analog input unit NA0AX06-MR.

2-2-1 Analog Output Unit Specifications

Provides detailed specifications for the analog output unit NA0AY02-MR.

2-2-1 Analog Input/Output Unit Specifications

Provides detailed specifications for the analog input/output unit NA0AW06-MR.

2-2-1 Analog Output Board Specifications

Provides detailed specifications for the analog output board NA3AY02-MR.

2-2-1 Analog Input/Output Board Specifications

Provides detailed specifications for the analog input/output board NA3AW03-MR.

2-2-1 Thermocouple Input Unit Specifications

Provides detailed specifications for thermocouple input units.

2-2-1 Resistance Thermometer Input Unit Specifications

Provides detailed specifications for resistance thermometer element input units.

2-2-2 Analog Input Conversion Characteristics

2-2-2 Analog Output Conversion Characteristics

2-4 Analog Input Wiring

2-4 Analog Output Wiring

2-4 Thermocouple Input Wiring

2-4 Resistance Thermometer Element Input Unit Wiring

Section 3 Programming

3-2 System Definition and Unit Registration

Explains how to register units in the system definition and configuration.

3-2-2 Setting Analog Input Parameters

Details how to set resolution and moving average for analog input units.

3-2-2 Setting Thermocouple Input Parameters

Details how to set sensor type, moving average, and sampling period for thermocouple units.

3-2-2 Setting RTD Input Parameters

Details how to set sensor type, moving average, and sampling period for RTD units.