Fuji Electric NA3AW03-MR User Manual

series
USER’S MANUAL
Analog Unit
FEH527d

Fuji Electric NA3AW03-MR Specifications

General

Screen Size	3.5 inches
Display Type	TFT LCD
Resolution	320 x 240 pixels
Communication Interface	RS-232
Supply Voltage	24 V DC
Type	HMI
Operating Temperature	0°C
Storage Temperature	-20°C

Summary

Safety Precautions

Section 1 Overview

1-1 Product List

1-2 Features

1-2-1 Number of Connectable Units

Section 2 Specifications

2-1 General Specifications

Details environmental, mechanical, and electrical specifications for the units.

2-2 Functional/Performance Specifications

Covers detailed performance characteristics like accuracy, resolution, and ranges.

2-2-1 NA0AX06-MR Analog Input Unit Specifications

Lists detailed specifications for the Analog input unit NA0AX06-MR.

2-2-1 NA0AY02-MR Analog Output Unit Specifications

Lists detailed specifications for the Analog output unit NA0AY02-MR.

2-2-1 NA0AW06-MR Analog Input/Output Unit Specifications

Lists detailed specifications for the Analog input/output unit NA0AW06-MR.

2-2-1 NA3AY02-MR Analog Output Board Specifications

Lists detailed specifications for the Analog output board NA3AY02-MR.

2-2-1 NA3AW03-MR Analog Input/Output Board Specifications

Lists detailed specifications for the Analog input/output board NA3AW03-MR.

2-2-1 Thermocouple Input Unit Specifications

Lists detailed specifications for Thermocouple input units.

2-2-1 Resistance Thermometer Element Input Unit Specifications

Lists detailed specifications for Resistance thermometer element input units.

2-2-2 Analog Input Conversion Characteristics

2-2-2 Analog Output Conversion Characteristics

2-4 Wiring

2-4-1 Analog Input Wiring Diagrams

2-4-2 Analog Output Wiring Diagrams

2-4-3 Thermocouple Input Wiring Diagram

2-4-4 Resistance Thermometer Element Input Wiring Diagram

Section 3 Programming

3-1 Memory Assignment

Memory Assignment for Various Units

3-2 System Definition

Explains how to configure units within the system software.

3-2-1 Registering Units

Guides on adding main and expansion units in the system definition screen.

3-2-2 Setting Parameters