Need help?Do you have a question about the Fuji Electric Faldic-a RYS-R Series and is the answer not in the manual?
General| Brand | Fuji Electric |
|---|---|
| Model | Faldic-a RYS-R Series |
| Category | Controller |
| Language | English |
Explains DANGER and CAUTION indications used in the manual for hazard identification.
Explains the location and contents of warning displays, including risks of electric shock and proper grounding.
Details the RYS-L type amplifier for linear motion control, including its upper level interface options.
Explains the RYS-R type amplifier for rotation indexing systems, including its upper level interface.
Explains torque-speed characteristics for acceleration/deceleration areas 1 and 2, and continuous operation area.
Explains the ALM signal, which activates when amplifier protective functions detect an alarm, and how it can be reset.
Explains the Deviation Excessive [OF] function, which sets the deviation amount for alarm detection.
Describes the Position Preset function, which rewrites the current station number and can reset alarms.
Details the Positioning Cancel signal, which stops the positioning action by initiating deceleration, and its behavior with other signals.
Explains the Temporary Stop signal, which temporarily halts a positioning action by starting deceleration.
Describes the Forced Stop [EMG] input and Forced Stop Detection [41] output signals, used to forcibly stop the motor.
Explains the External Fault Input signal, which forcibly stops the motor when turned off, similar to the EMG signal.
Describes the Dynamic Braking signal, which activates when the amplifier detects a major fault, and its function.
To Next Page