Fuji Electric Faldic-a RYS-R Series - 7.6 Positioning data edit mode

7-17
MHT260a (Engl.)
7.6 Positioning data edit mode
CAUTION : For RYS-R type amplifier, the positioning data edit mode is invalid.
The positioning data edit mode allows to edit the position data, speed data, timer data, status and M code. These 5 data compose 1 point
of positioning data.
Press the MODE key to display
[ ], and hold down the ENT key for at least 1 [s] to select the data to edit.
: Position data
: Speed data
: Timer data
: Status
: M code
Then, press the ∧ key or ∨ key to select the number of positioning data to edit first.
Pressing the ENT key allows to edit its contents.
: Positioning data number
(1) Position data ( )
As the position data, set the motor stop position. The setting range is -79,999,999 to 79,999,999 in 1 step.
ENT（1 [s] or more）
ＥＳＣ
∧∨
ＥＮＴ
ＥＳＣ
∧∨
ＥＮＴ
ＥＳＣ
ＥＮＴ
ＥＳＣ