Fuji Electric Faldic-a RYS-R Series - 7.5 Parameter edit mode

7-14
MHT260a (Engl.)
7.5 Parameter edit mode
In the parameter edit mode, basic paras. and system paras. can be edited.
Display [
] by the MODE key and hold down the ENT key for at least 1 [s] to select the basic para. or system para.
: Basic para.
: System para.
By the ∧ key or ∨ key, select a number of para. By pressing the ENT key, its contents can be edited.
: Basic or system para. number
(1) Basic parameter
In basic para., rather frequently used contents are registered. Changed setting of most basic para. immediately affects the amplifier and
motor actions.
(2) System parameter
System para. register the functions of input/output terminals and other contents related to system setting. Changed setting of most system
para. is valid only after turning off and on power.
∧∨
∧∨
ESC
ENT(1 [s] or more)
ESC
ENT(1 [s] or more)
∧∨
∧∨
ESC
ENT
ESC
ENT
ESC
ENT
ESC
ENT
ESC
ENT
ESC
ENT